UV BALLAST EPS800W/4.5~8.0A (230V)


Haisen UV Ballast Application 

UV Ballast EPS800W/4.5~8.0A for Amalgam UV lamps use in uv water purification and disinfection system for Industrial  market,Industrial sewage treatment, Municipal wastewater treatment.


Haisen UV Ballast Advantages

> Low repair rate make you no longer worry about the after sales problem.

> Competitive price can save your cost for manufacture your uv desinfection system.

> CE,UL, CUL approval the stable quality and performance.

> Standard or customized version can be provided on customer  request



> electronic ballast for two-lamp operation
> to be used with four-wire lamps
> Preheat start
> Status forwarding
potential free relay contacts for lamp on / lamp fault
relay activated:lamp on
> relay contacts:
potential free,load:50~500mA at 24~277V AC
50~500mA at 5~30V DC

Technical Data

Lamp power: 600~800W
Lamp type: GPHHA1520T10L
GIA1513T10L, NNI800, TUV800W
Lamp current: 4.5A~8.0A
— — — — — — — — — — — — — — — —
Mains voltage: 198~264VAC 50/60Hz
Efficiency.: >90%
Operating frequency: 25~60KHz
Power factor: >0.9 typ.
Ambient temperature: 0~40oC
Tc-temperature: Max. 70oC
Dimensions: 250X141X66mm
Weight: 1.50Kg

Mounting Restrictions

Wire gauge:0.5-1.5mm², strip length: 8mm
Disconnect input power before installing or servicing
Ballast case must be grounded
Don’t short any two wires of the input and output wires
For indoor use only
Max.Cable length between the ballast and lamp:5.0m

uv ballast 800w