UV BALLAST EPS600W/3.0-6.0A (230V)

Description

Haisen UV Ballast Application 

UV Ballast EPS600W/3.0~6.0A for Amalgam UV lamps use in uv water purification and disinfection system for Industrial  market,Industrial sewage treatment, Municipal wastewater treatment.

 

Haisen UV Ballast Advantages

> Low repair rate less then 0.1% make you no longer worry about the after sales problem.

> Competitive price can save your cost for manufacture your uv desinfection system.

> CE,UL, CUL approval the stable quality and performance.

> Standard or customized version can be provided on customer  request

 

Features

> electronic ballast for two-lamp operation
> to be used with four-wire lamps
> Preheat start
> Status forwarding
potential free relay contacts for lamp on / lamp fault
relay activated:lamp on
> relay contacts:
potential free,load:50~500mA at 24~277V AC
50~500mA at 5~30V DC

Technical Data

Lamp power: 330~600W
Lamp type: GPHHA1310T10L
GPHHA1554T10L, NNI400, NNI600
Lamp current: 3.0A~6.0A
— — — — — — — — — — — — — — — —
Mains voltage: 198~264VAC 50/60Hz
Efficiency.: >90%
Operating frequency: 25~60KHz
Power factor: >0.9 typ.
Ambient temperature: 0~40oC
Tc-temperature: Max. 70oC
Dimensions: 250X141X66mm
Weight: 1.50Kg

Mounting Restrictions

Wire gauge:0.5-1.5mm², strip length: 8mm
Disconnect input power before installing or servicing
Ballast case must be grounded
Don’t short any two wires of the input and output wires
For indoor use only
Max.Cable length between the ballast and lamp:5.0m

UV BALLAST EPS600W/3.0-6.0A

EPS600W/3.0~6.0A DATASHEET DOWNLOAD

UV BALLAST EPS40W/425mA